How to Make a Concrete Bird Bath Bowl
Every editorial product is independently selected, though we may be compensated or receive an affiliate commission if you buy something through our links. Ratings and prices are accurate and items are in stock as of time of publication.
This DIY concrete leaf birdbath will create a one-of-kind watering hole for the birds in your backyard. This DIY birdbath is easier than you think!
You don't have to pay a lot for a unique birdbath. Look for plants with large leaves in your garden. Then turn one of those big beauties into a DIY concrete birdbath. This leaf birdbath makes a serene resting place for butterflies, too. Psst—here's how to attract birds to use a birdbath.
Materials for a DIY Concrete Birdbath:
- Large plant leaf
- 1/2 to 1 bag of play sand
- 3 to 4 cups of contractor's sand
- 1 to 2 cups Portland cement
- Concrete fortifier
DIY Birdbath Step-By-Step Instructions:
Step 1
Choose a leaf at least 10 inches long and 7 inches wide. (We used a hosta leaf here, but rhubarb, burdock, gunnera, castor bean, caladium and elephant-ear leaves also work well.) Cut the stem off.
Learn how to clean a birdbath.
Step 2
Spread out a sheet of plastic or a large plastic bag to protect your work surface. Pour the play sand onto the plastic and make a pile. Wet the sand slightly so that it sticks together, the way you would for a sand castle.
Shape the pile to approximate the size and shape of your leaf, but keep in mind that birds do not like baths that are more than a couple of inches deep. Once the sand pile is to your liking, cover it with a piece of plastic or a plastic bag. Place the leaf vein-side up on top of the plastic, centering it.
Here's how to repair a cracked birdbath.
ⓘ
Step 3
In a plastic bowl, mix three parts contractor's sand to one part Portland cement. Mix 1/4 cup of water and 1/4 cup of concrete fortifier, and add slowly to the sand until it reaches the consistency of a thick brownie batter. The easiest way to do this is to squish it with your hands wearing rubber gloves. Mix more water and fortifier to add to the sand if needed.
Rinse your gloves or hands. Pick up a handful of the sand mixture, plop it on the center of the leaf and spread to the edges. This gives you a solid surface that picks up the leaf's veining while removing air bubbles.
Learn how to make a DIY hummingbird mister birdbath.
Step 4
Now slowly start building up the thickness of the casting. For strength, keep it between 1/2 and 1 inch thick. Be careful to keep the edges smooth to get a good contour. Once you have it at a good thickness, build up the center to make a pedestal.
Step 5
Cover the mixture loosely with plastic. If it's a hot day, you might want to mist the casting from time to time to keep it from drying out too fast and cracking. Let your project dry slowly for about 24 hours, then peel off the leaf. If the casting feels brittle, let it sit for another day before peeling off the leaf.
Attract more birds to your yard with food, water and shelter.
Step 6
After the casting has dried for at least a week, you can paint or seal your DIY birdbath, or just leave it as it is. We painted this one green. Fill it with cool clean water, and set out your DIY concrete birdbath for birds to enjoy!
You can also turn a birdbath into a planter for a mini fairy garden!
How to Make a Concrete Bird Bath Bowl
Source: https://www.birdsandblooms.com/backyard-projects/diy-bird-bath/diy-leaf-bird-bath/