Drawing a Circle Using a Safety Compass
Download Article
Download Article
Drawing a circle freehand is catchy, but luckily there are lots of tools and tricks at your disposal that can help. From using a compass to tracing round objects, cartoon perfect circles will be a cakewalk once you discover the method that works for you!
-
1
Find something circular that you can trace. Any round object will work. You can use a round glass, the bottom of a candle, or a round piece of paper. Just make sure the rounded edge is smooth.
-
ii
Agree the circular object on a piece of paper. Take the round office of the object and place it flat on the paper where y'all want to draw your circle. Use the manus you don't describe with to agree information technology in identify so information technology doesn't move when yous're tracing it.
Advertisement
-
3
Trace effectually the edge of the object. Take a pencil and follow forth the round edge of the object until you've completed the circle. When you're finished, take the object off the piece of paper and yous'll have a perfect circle!
- If there are any gaps in the circle later you motility the round object, fill them in with the pencil.
Advertizing
-
1
Attach a pencil to a cartoon compass. Insert the pencil in the slot at the finish of the compass and tighten it into place and then it's secure.[1]
-
2
Adjust the compass arms depending on how large you lot want your circumvolve to be. If you lot want a big circle, pull the arms of the compass abroad from each other so the bending betwixt them is bigger. If you lot want a modest circle, push the arms closer together so there'southward a pocket-sized angle between them.[2]
-
3
Place the ends of the compass on a piece of newspaper. Position the compass where you want to draw the circle. The end of the compass with the pencil attached to it will be where the exterior of your circle is, and the other cease of the compass will be the center of the circle.[3]
-
4
Rotate the compass to draw a circle. Keeping both ends of the compass on the slice of paper, rotate the compass so the end with the pencil spins around and draws a circle.[4]
- Avoid shifting the compass while yous're drawing the circumvolve or your circumvolve will be uneven.
Advertizing
-
i
Tie a slice of string to the pointed end of a pencil. The longer the piece of string you use, the bigger your circumvolve will be.
-
2
Hold the stop of the cord downwardly on a piece of paper. Wherever the cease of the string is on the newspaper is where the center of the circle will exist. Apply your fingers to agree the end of the string in place.
-
3
Pull the string taut and draw a circle with the pencil. Go on holding the terminate of the string down as yous're drawing the circle. If you keep the string pulled taut every bit you draw a circle effectually the center, you should finish up with a perfect circle!
Advertisement
-
1
Lay a protractor flat on a piece of paper. Position the protractor on the paper where yous want to draw a circle.
-
2
Trace the curved edge of the protractor. This will exist the start half of your circle. Don't trace the flat border of the protractor.
- Brand sure y'all concord the protractor in place while you lot trace it and so it doesn't shift and mess upward your line.
-
3
Rotate the protractor and trace the other half of the circumvolve. Line the straight edge of the protractor up with the ends of the curved line you traced. Then, trace the curved edge of the protractor to close your circle.
Advertisement
-
1
Place newspaper on top of a piece of paper-thin. Any kind of paper-thin volition piece of work, equally long as it'south thick and a pin tin can push through it.[five]
-
2
Button a pivot through the paper and the paper-thin. Position the pivot so it'due south in the spot where you lot want the center of the circle to be. Make sure it's secure in the cardboard so it doesn't shift when you're drawing the circle.[six]
-
3
Put a rubber ring around the pin. The larger the rubber band, the bigger your circle volition be. If you want to describe a small circle, use a minor rubber band or wrap the rubber band effectually the pivot twice.[vii]
- If you don't have a safe band, yous can tie a slice of string into a circle and use that instead.
-
iv
Identify the tip of a pencil in the other end of the rubber band. At this point, the rubber band should be wrapped around both the pivot and the pencil.[8]
-
five
Pull the rubber band taut and draw a circle with the pencil. Brand sure you go on the condom ring pulled taut while you describe the circumvolve so information technology's fifty-fifty.[9]
Advertisement
-
ane
Hold a pencil like you usually would. You want to concord the pencil using the hand you'd normally draw and write with.
-
two
Place the tip of the pencil on a piece of paper. Cull a spot on the paper where you want to draw your circle.
- Don't printing difficult on the paper with the tip of the pencil. Yous want to be lightly holding the pencil tip on top of the paper.
-
three
Move the paper in a circle underneath the pencil. Use your gratuitous hand to slowly movement the paper in a circumvolve under the pencil, which will crusade the pencil to draw a circle on the paper. If you want to draw a big circle, make a big circle with the paper. If you want to depict a small circle, just make a modest circumvolve when you move the paper.
Advert
Add together New Question
-
Question
Is information technology possible to draw a perfect circle?
This answer was written by 1 of our trained squad of researchers who validated information technology for accuracy and comprehensiveness.
wikiHow Staff Editor
Staff Answer
It's hard to do information technology freehand, but you can brand a perfect or almost perfect circle pretty easily by tracing a circular object or using a compass.
-
Question
How do yous depict a large circle?
This answer was written past one of our trained team of researchers who validated information technology for accuracy and comprehensiveness.
wikiHow Staff Editor
Staff Answer
You tin fix a compass at a broad setting or trace a large circular object, such as a dinner plate or the bottom of a apartment frying pan.
-
Question
What are the parts of a circle?
This answer was written past ane of our trained team of researchers who validated it for accuracy and comprehensiveness.
wikiHow Staff Editor
Staff Answer
The distance around the exterior of a circle is called the circumference, while the distance beyond is called the bore. If you mensurate from the center of the circle to a point on the outer border, that's the radius. Other parts include a sector (a wedge or slice of the circumvolve that goes from the center to two points on the outer edge), an arc (part of the outer edge of the circle), and a chord (a line drawn through any 2 points on the circumvolve—the diameter is a kind of chord).
-
Question
How did ancient people draw circles?
Much as you lot do but they used different mediums, such every bit soil, ochres, rock tints and the like.
Ask a Question
200 characters left
Include your e-mail address to get a message when this question is answered.
Submit
Advertisement
Video
Thank you for submitting a tip for review!
About This Commodity
Article Summary X
To draw a circle, take a compass with a pencil attached and place the ends on a slice of paper. Then, keeping the end without the pencil stationery, rotate the compass 360 degrees so the pencil draws a perfect circle. If you don't have a compass, you can describe a circle using a slice of string instead. First, necktie one end of the string to the tip of a pencil. Next, hold the other end of the string down on a piece of paper where you want the center of the circle to be. And so, only pull the pencil so the string is taut and draw a circle around the end of the string. If you lot want to learn how to draw a circle using a protractor or a pivot, continue reading the article!
Did this summary aid you lot?
Thank you to all authors for creating a page that has been read 607,313 times.
Did this article assistance you?
Source: https://www.wikihow.com/Draw-a-Circle